Last Modified: 11-29-2007 1.6 A
Service Category: Drivetrain Section: Transfer/4wd/Awd
Model Year: 2008 Model: Sequoia Doc ID: RM0000030KP007X
Title: JF3A TRANSFER / 4WD / AWD: 4WD CONTROL SWITCH: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH

(a) Remove the front door scuff plate RH

HINT:

Use the same procedure for the LH side.

2. REMOVE COWL SIDE TRIM BOARD LH

(a) Remove the front cowl side trim board RH

HINT:

Use the same procedure for the LH side.

3. REMOVE INSTRUMENT SIDE PANEL LH

(a) Remove the instrument side panel RH

HINT:

Use the same procedure for the LH side.

4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL (2008 Sequoia)+

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH

(a) Remove the lower instrument panel finish panel sub-assembly RH

HINT:

Use the same procedure for the LH side.

6. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

7. REMOVE 4WD CONTROL SWITCH

(a) Detach the 3 claws to remove the switch.